Parts for TESCO HXI Top Drive
Get reliable OEM & aftermarket parts for your TESCO HXI Top Drive System. We are a trusted source for high-quality spare parts essential for the smooth operation of your drilling & handling equipment. We supply nearly all parts for the TESCO HXI, including motors, gearboxes, swivel assemblies, control panels, hardware & components. Browse the full parts list below.
Spare Parts for
TESCO HXI Parts
| OEM Part # | Part Description | DTO Part # |
|---|---|---|
| 1002 | Screw, Cap, Hex Hd, 3/4" x 1 1/2”, Gr8, Pld | THX00001 |
| 1014 | Screw, Cap, Hex Hd, 3/8" x 1”, Gr8, Pld – 250T Elev. | THX00002 |
| 1038 | Screw, Cap, Skt Hd, #10" x 1 1/4", Dr Hd | THX00003 |
| 1044 | Screw, Cap, Skt Hd, 1/2" x 1 1/2", Dr Hd - Grabber | THX00004 |
| 1045 | Screw, Cap, Skt Hd, 1/2" x 1"- Grabber | THX00005 |
| 1059 | Washer, Lock, Helical Spring, Hi Collar 1”, Black | THX00006 |
| 1061 | Washer, Lock, Helical Spring, Hi Collar 7/8”, Black | THX00007 |
| 1064 | Washer, Lock, Helical Spring, Hi Collar 5/8”, Black | THX00008 |
| 1079 | Washer, Lock, Helical Spring, 5/8”, Alloy, Pld | THX00009 |
| 1092 | Pin, Cotter, 5/32” | THX00010 |
| 1112 | Fitting, Grease, Str, Long 1/8” MNPT | THX00011 |
| 1115 | FTG, GREASE, STRAIGHT, 1/4" NPT | THX00012 |
| 1120 | All Thread – For Anchor Clamp | THX00013 |
| 1121 | All Thread | THX00014 |
| 1488 | Fitting, Hyd, Str, 4MJIC x 2MORB | THX00015 |
| 1491 | Fitting, Hyd, Str, 4MJIC x 6MORB | THX00016 |
| 1493 | Fitting, Hyd, Str, 12MJIC x 12MORB | THX00017 |
| 1497 | Fitting, Hyd, Str, 6MJIC x 6MORB | THX00018 |
| 1500 | Fitting, Hyd, Str, 6MJIC x 4MORB | THX00019 |
| 1502 | Fitting, Hyd, Str, 8MJIC x 8MORB | THX00020 |
| 1507 | Fitting, Hyd, Str, 8MORB x 8FJIC-Swivel | THX00021 |
| 1676 | Grabber Die - Standard | THX00022 |
| 1840 | Sling – Endless Nylon | THX00023 |
| 1842 | Sling – c/w (2) – 6” Eyes | THX00024 |
| 1843 | Sling – c/w (2) – 6” Eyes | THX00025 |
| 1846 | Sling – For Torque Track Pick Up Pin – c/w (2) 6” Eyes | THX00026 |
| 2008 | Quick Coupler - Standard – Male, FNPT, Series 78 | THX00027 |
| 2021 | Cartridge Body, Relief, 2 Way - Case Drain | THX00028 |
| 2093 | Rail Mounted Diode, 3A | THX00029 |
| 2348 | Nut, Hex, Slotted, 1”, Gr 2 | THX00030 |
| 2361 | Pin, Safety, 1/8” Wire | THX00031 |
| 2522 | Clamp, Hobble | THX00032 |
| 2523 | Hobble – For Elevator | THX00033 |
| 2526 | Grabber Die | THX00034 |
| 2590 | Shackle, Anchor Bolt, G2130, 1”, 8 ½ Ton | THX00035 |
| 2592 | Chain Link - Screw Lock Quick Link | THX00036 |
| 2599 | Tie Down Rachet, 3300 lbs. | THX00037 |
| 2603 | Breather, Fitting, Air, ½” MNPT | THX00038 |
| 2628 | Lifting Eye – For Rineer Motor | THX00039 |
| 2697 | Breather – For Gearbox | THX00040 |
| 2788 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 8MORB | THX00041 |
| 2799 | Fitting, Hyd, Plug, Skt Hd, 4MORB | THX00042 |
| 2802 | Fitting, Hyd, Plug, Hex Hd, 4MORB | THX00043 |
| 2823 | Pin, Elevator Latch Lock, 250T | THX00044 |
| 2893 | Fitting, Hyd, Str, 12MJIC x 8MORB | THX00045 |
| 2895 | Quick Coupler - Standard – Female, FNPT, Series 78 | THX00046 |
| 2994 | Turnbuckle, Jaw x Jaw | THX00047 |
| 3018 | Shackle, Anchor Bolt, G2130, ½””, 2 Ton | THX00048 |
| 3020 | Turnbuckle, Jaw x Jaw | THX00049 |
| 3026 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00050 |
| 3040 | Grabber Cylinder, Complete | THX00051 |
| 3045 | GUARD, HOSE | THX00052 |
| 3046 | Retraction, Pin, Grabber | THX00053 |
| 3051 | Holder, Die | THX00054 |
| 3054 | Die Keeper Plate | THX00055 |
| 3056 | CYLINDER, GRABBER BOX | THX00056 |
| 3057 | GLAND, NUT, GRAB CYL | THX00057 |
| 3058 | PISTON, GRAB CYL | THX00058 |
| 3059 | Retraction Cap, Grabber | THX00059 |
| 3060 | EXTENSION, PORT | THX00060 |
| 3061 | COVER, DIRT, GRAB | THX00061 |
| 3062 | SHOE, CYLINDER, 8-1/2&9", 2/UNIT | THX00062 |
| 3116 | Screw, Cap, Hex Hd, 1/2" x 1 1/2”, Gr8, Pld, Dr Hd | THX00063 |
| 3155 | Screw, Cap, Skt Hd, 3/8" x 1 1/4", Dr Hd | THX00064 |
| 3157 | Nut, Hex, Jam, ½”, Gr 2 | THX00065 |
| 3160 | Plug, Cavity | THX00066 |
| 3196 | Washer, Lock, Helical Spring, Hi Collar 3/4”, Black | THX00067 |
| 3383 | Pin, Torque Frame | THX00068 |
| 3384 | Pin, Extend Arm | THX00069 |
| 3406 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00070 |
| 3419 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00071 |
| 3437 | Pin, Grabber Lift | THX00072 |
| 3464 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00073 |
| 3467 | Screw, Cap, Hex Hd, 3/4" x 4”, Gr8, Pld, Dr Thd | THX00074 |
| 3468 | Pin, Hitch, ¾” Dia x 4 ¼” Usable Length c/w Hairpin | THX00075 |
| 3490 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00076 |
| 3493 | Screw, Cap, Hex Hd, 3/4" x 3 1/2”, Gr8, Pld, Dr Thd | THX00077 |
| 3506 | Screw, Cap, Hex Hd, 1" x 7”, Gr8, Pld, Dr Thd – Link Ret. | THX00078 |
| 3533 | Screw, Cap, Hex Hd, 3/8" x 3/4", Gr8, Pld, Dr Hd - PH Lock | THX00079 |
| 3690 | Washer, Lock, Helical Spring, Hi Collar 3/8”, Black | THX00080 |
| 3725 | Screw, Cap, Hex Hd, 3/8" x 1”, Gr8, Pld, Dr Hd | THX00081 |
| 3727 | Screw, Cap, Skt Hd, 1/2" x 1 1/4", Dr Hd - Grabber | THX00082 |
| 3731 | Screw, Cap, Hex Hd, 3/4" x 1 1/2”, Gr8, Pld, Dr Hd | THX00083 |
| 3736 | Screw, Cap, Hex Hd, 3/4" x 4”, Gr8, Pld, Dr Hd - PH | THX00084 |
| 3742 | Screw, Cap, Hex Hd, 1" x 3 1/2”, Gr8, Pld, Dr Thd | THX00085 |
| 3832 | Shim, Torque Bushing, 1/8” | THX00086 |
| 3833 | Shim, Torque Bushing, 1/16” | THX00087 |
| 3834 | Liner, Back, UHMW, 72” Std Torque Bushing | THX00088 |
| 3835 | Liner, Side, UHMW, 72” Std Torque Bushing | THX00089 |
| 3836 | Liner, Front, UHMW, 72” Std Torque Bushing | THX00090 |
| 3879 | Transducer, 4-20Ma, 0-5000 PSI | THX00091 |
| 3966 | Rail Mounted Terminal Block - Red | THX00092 |
| 4022 | Bolt, Rod End, Modified, | THX00093 |
| 4023 | Spacer, Rod End - For Link Tilt Bolt | THX00094 |
| 4024 | Castle Nut – For Link Tilt - Modified | THX00095 |
| 4030 | O-Ring, 1.296” ID x .139” Dia. | THX00096 |
| 4044 | O-Ring, 9.484” ID x .139” Dia. - For Motor Retainer | THX00097 |
| 4261 | Fitting, Hyd, Plug, Skt Hd, 2MORB | THX00098 |
| 4333 | Nut, Hex, Lock, Nylon, 3/8” Gr. 8 Pld | THX00099 |
| 4543 | Fill Up, Accumulator, Assembly | THX00100 |
| 4559 | Motor Case Drain Test Kit - c/w Flow Meter | THX00101 |
| 5127 | Fitting, Hyd, Plug, Skt Hd, 8MORB | THX00102 |
| 5128 | Fitting, Hyd, Plug, Skt Hd, 6MORB | THX00103 |
| 5132 | Fitting, Hyd, Plug, Hex Hd, 5MORB | THX00104 |
| 5258 | Clamp, Connection Lock, 6 5/8” (2 Halves) | THX00105 |
| 5333 | Screw, Cap, Hex Hd, 1" x 4”, Gr8, Pld, Dr Thd | THX00106 |
| 5440 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00107 |
| 5459 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00108 |
| 5465 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00109 |
| 5881 | Washer, Lock, Helical Spring, 1/2”, Alloy, Pld | THX00110 |
| 5965 | Screw, Cap, Hex Hd, 3/8" x 1-1/4", Gr8, Pld, Dr Hd | THX00111 |
| 5966 | Screw, Cap, Hex Hd, 1/2" x 1 1/4”, Gr8, Pld, Dr Hd | THX00112 |
| 5967 | Screw, Cap, Hex Hd, 1/2" x 1 3/4”, Gr8, Pld, Dr Hd Grabber | THX00113 |
| 5968 | Screw, Cap, Skt Hd, 1/4" x 1", Dr Hd | THX00114 |
| 6060 | Proximity Switch, PH Lock | THX00115 |
| 6115 | Needle, Valve, 6000 PSI 3/8” F/F | THX00116 |
| 6188 | Screw, Set, Skt Drive, Cup Pt, ½” x ¾’ | THX00117 |
| 6196 | Split Flange – For Motor Lines – Motor Side | THX00118 |
| 6925 | Screw, Cap, Hex Hd, 1/2" x 2 1/2”, Gr8, Pld, Dr Hd | THX00119 |
| 7002 | BOX, TORQUING, GRABBER 9" | THX00120 |
| 7135 | Washer, Lock, Helical Spring, 3/8”, Alloy, Pld | THX00121 |
| 7353 | Gauge, 0-3000 PSI, 2.5” OD, x ¼” MNPT, CBM | THX00122 |
| 7452 | BEARING THRUST | THX00123 |
| 7841 | Nut, Hex, Lock, Nylon, 3/4” Gr. 8 Pld | THX00124 |
| 7855 | Washer, Lock, Helical Spring, 3/4”, Alloy, Pld | THX00125 |
| 7909 | Screw, Cap, Hex Hd, 5/8" x 5”, Gr8, Pld, Dr Hd | THX00126 |
| 7972 | Cylinder, Hyd, Dbl Acting, 2.5”Bore, 1.25”Rod, 29”Str | THX00127 |
| 8227 | Screw, Set, Skt Drive, Rnd Pt, 7/8"-9UNCx1.72", Mod | THX00128 |
| 8256 | Strip Kit – for Actuator | THX00129 |
| 8528 | Actuator, Mudsaver Valve, 4186-TDA-Ser-F | THX00130 |
| 8626 | Screw, Cap, Hex Hd, 3/8" x 1-1/2”, Gr8, Pld, Dr Hd | THX00131 |
| 8763 | Screw, Cap, Skt Hd, 3/8" x 1", Dr Hd | THX00132 |
| 8823 | Split Flange – For Motor Lines – Manifold Side | THX00133 |
| 9231 | Washer, Flat, Type A, Narrow, 3/4”, Alloy, Pld | THX00134 |
| 9232 | Washer, Flat, Type A, Narrow, 5/8”, Hardened, Pld | THX00135 |
| 9520 | Cylinder, Hyd, Dbl Acting, 2.5”Bore, 1.25”Rod, 29”Str | THX00136 |
| 9755 | Ring, Rtng, Internal, 0.938"ID Shaft, 0.042"Thk | THX00137 |
| 9789 | Nut, Hex, Lock, Nylon, 5/8” Gr. 8 Pld | THX00138 |
| 10328 | COLLAR, LOAD | THX00139 |
| 10513 | Fitting, Hyd, Str, 8MJIC x 8FNPT | THX00140 |
| 10535 | Fitting, Hyd, 90deg., Elbow, 4MJIC x 4FNPT | THX00141 |
| 10637 | Washer, Lock, Helical Spring, 1”, Alloy, Pld | THX00142 |
| 11159 | Screw, Cap, Hex Hd, 5/8" x 3 1/2”, Gr8, Pld, Dr Hd | THX00143 |
| 11307 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00144 |
| 11315 | Quill Collar, Spline Lock | THX00145 |
| 12128 | Fitting, Hyd, Tee, 6MJIC x 6MJIC x 6MORB-Br | THX00146 |
| 12289 | Fitting, Hyd, 45deg., Elbow, 4MJIC x 6MORB | THX00147 |
| 12291 | Fitting, Hyd, 45deg., Elbow, 6MJIC x 6MORB | THX00148 |
| 12948 | Cord, Pigtail, 14/37C, 3.1 M | THX00149 |
| 12956 | Oil Seal, 6 7/8” Shaft x 8 3/8”OD (Bottom) | THX00150 |
| 12962 | O-Ring, 9.725” ID x .210” Dia. - For Bottom Retainer | THX00151 |
| 13075 | Screw, Cap, Skt Hd, 1/2"-13UNCx6", Dr, Hd | THX00152 |
| 13075 | Screw, Cap, Skt Hd, 1/2" x 6", Dr Hd | THX00153 |
| 13094 | Retainer, Lower, Load Nut, EMI | THX00154 |
| 13095 | Collar, Split, Inner, Load Nut, EMI | THX00155 |
| 13097 | Assembly, Washpipe, 7500 PSI c/w Upper / Lower Nuts | THX00156 |
| 13098 | Sleeve, Load Nut, EMI | THX00157 |
| 13295 | Screw, Cap, Skt Hd, 5/8" x 2 1/4", Dr Hd | THX00158 |
| 13394 | O-Ring, 4.35” ID x .210” Dia. - For Gooseneck | THX00159 |
| 13395 | Tube, Holding, Washpipe | THX00160 |
| 13396 | Washpipe Packing, Set | THX00161 |
| 13418 | Screw, Cap, Skt Hd, 1" x 9", Dr Hd | THX00162 |
| 13557 | Screw, Cap, Hex Hd, 3/4" x 3”, Gr8, Pld, Dr Hd | THX00163 |
| 13696 | Screw, Cap, But Hd, 1/4" x 1/2”, Gr8, Pld, Dr Hd | THX00164 |
| 13721 | Washer, Flat, Type A, Wide, 3/8” hardened, Pld | THX00165 |
| 14249 | Washer, Flat, Type A, Narrow, 1”, Hardened, Pld | THX00166 |
| 14732 | Screw, Cap, Hex Hd, 5/8" x 2”, Gr8, Pld, Dr Hd | THX00167 |
| 14734 | Screw, Cap, Skt Hd, 3/4" x 1 3/4", Dr Hd (3 Hole) | THX00168 |
| 14756 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00169 |
| 15516 | Screw, Cap, Skt Hd, 1" x 2 3/8", Mod | THX00170 |
| 15517 | Ring, Internal Retaining 1.575’ ID | THX00171 |
| 15520 | Screw, Set, Skt Drive, Cup Pt, ½” x ½” | THX00172 |
| 15645 | Cylinder, Hyd, Sngl Stage, 2.5”Bore, 1.3”Rod, 16”Str | THX00173 |
| 16143 | Shackle, Anchor Bolt, G2130, ¾”, 4 3/4 Ton c/w Cert. | THX00174 |
| 16245 | Relief Valve, 100-250 PSI, Vent-Atmosphere Case Drain | THX00175 |
| 16267 | Directional Valve – Vickers - Unloader | THX00176 |
| 16268 | Directional Valve – Vickers | THX00177 |
| 16269 | Directional Valve – Vickers – Motor Relief | THX00178 |
| 16270 | Directional Valve – Vickers – (Cylinder Spool) | THX00179 |
| 16604 | PIN, DOWEL, 3/4" X 2" | THX00180 |
| 16726 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00181 |
| 17265 | Snap Ring, Washpipe | THX00182 |
| 17321 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00183 |
| 17329 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00184 |
| 18109 | Breakaway Stem, Cylinder Mount – For Torque Bushing | THX00185 |
| 18145 | Dust Seal – For Rineer Motor | THX00186 |
| 18172 | Breakaway Base, Cylinder Mount – For Torque Bushing | THX00187 |
| 19025 | Pad Eye, Hose Saddle, SWL 3 Ton | THX00188 |
| 19204 | Shaft Seal – For Rineer Motor | THX00189 |
| 340167 | O-Ring, 10.475” ID x .210” Dia. – For Top Retainer | THX00190 |
| 450188 | O-Ring, N70-260, 6.484" IDx0.139" Dia | THX00191 |
| 481183 | Bolt, Shoulder | THX00192 |
| 481184 | Seal, U - Cup, 1.0” ID x 1.5” OD | THX00193 |
| 500286 | Link Tilt Clamps – c/w Bolts and Lockwashers | THX00194 |
| 540226 | Turnbuckle, Jaw x Jaw | THX00195 |
| 540229 | Override Cap – Vickers DCV | THX00196 |
| 590047 | Relief Valve, Cartridge, DA, 100-3000 PSI | THX00197 |
| 710024 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00198 |
| 720197 | Nut, Hex, Lock, Spiralock – For 1” All Threads | THX00199 |
| 720222 | Gauge, 0-7500 PSI, 2.5” OD, x ¼” MNPT, LM | THX00200 |
| 720475 | Valve, Mudsaver, Dual Ball, Splined 4 ½” IF x 4 ½” IF | THX00201 |
| 720848 | Nut, Hex, Lock, – For ¾” TT Studs / ¾” All Thread | THX00202 |
| 730752 | Spring, Die, 2.0” OD x 3.5” Long, Heavy Duty | THX00203 |
| 730754 | Nut, Hex, Jam 1” Gr.8, Pld – For Turnbuckles | THX00204 |
| 731018 | Screw, Cap, Hex Hd, 1" x 7 1/2”, Gr8, Pld, Dr Hd | THX00205 |
| 731043 | Screw, Cap, Hex Hd, 5/8" x 2 1/4”, Gr8, Pld, Dr Hd | THX00206 |
| 731126 | Screw, Cap, Skt Hd, 1/2" x 2 3/4", Dr Hd | THX00207 |
| 731187 | Screw, Cap, Skt Hd, 5/8" x 2 3/4", Dr Hd - Link Clamp 250T | THX00208 |
| 731242 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00209 |
| 770184 | Isolation Barrier, Zone 2, 1 Ch, 24VDC | THX00210 |
| 820067 | Mud Shield | THX00211 |
| 820120 | Screw, Cap, Skt Hd, 3/4" x 3", Dr Hd | THX00212 |
| 820155 | Bushing, Load Collar, EMI/HXI | THX00213 |
| 820184 | Relief Valve, Cartridge, DA, 500-3000 PSI | THX00214 |
| 960054 | Screw, Cap, Hex Hd, 3/8" x 4 ½”, Gr8, Pld, Dr Hd | THX00215 |
| 970112 | Screw, Cap, Skt Hd, 3/4" x 7 1/2", Dr Hd | THX00216 |
| 970235 | Seal Kit, Greaseless Actuator, 4186 Series C & F | THX00217 |
| 1030252 | Screw, Cap, Hex Hd, 3/8" x 5”, Gr8, Pld, Dr Hd | THX00218 |
| 1090074 | Shuttle Valve, Cartridge 60l/min@ 7 Bar | THX00219 |
| 1090075 | Check Valve, Pilot Operated, Cartridge, 25l/min@ 500 Bar | THX00220 |
| 1090076 | Press. Reducing Valve, Cartridge, 30-140 | THX00221 |
| 1090077 | Check Valve, Pilot Operated, Cartridge, 30l/min@7 Bar | THX00222 |
| 1090079 | Intensifier, 1:2.8 Ratio 8l/min | THX00223 |
| 1100008 | QUILL | THX00224 |
| 1100010 | BULL GEAR | THX00225 |
| 1100028 | BEARING THRUST | THX00226 |
| 1100032 | RETAINER | THX00227 |
| 1100062 | Shuttle Valve, Cartridge, 2.4 GPM | THX00228 |
| 1100063 | Relief Valve, Cartridge, 25 GPM, 150-6000 PSI | THX00229 |
| 1100066 | Screw, Cap, Skt Hd, 7/8" x 10", Dr Hd | THX00230 |
| 1100067 | Screw, Cap, Hex Hd, 5/8" x 2 1/2”, Gr8, Pld, Dr Hd | THX00231 |
| 1100072 | Accumulator, 2 Gallon, 3000 PSI - Counterbalance | THX00232 |
| 1100092 | Flow Control Valve, Cartridge, Handknob – Grabber Lift | THX00233 |
| 1100093 | Accumulator, 1 PT, 3000 PSI – Grabber Lift | THX00234 |
| 1100095 | Screw, Flange, -Lock, Hex Hd, ½” x 2” Gr 8, Pld, Dr Hd | THX00235 |
| 1100097 | Shim, Stock, Steel – For Quill Thrust Bearing | THX00236 |
| 1100098 | Shim, Stock, Steel – For Quill Thrust Bearing | THX00237 |
| 1100099 | Shim, Stock, Steel – For Quill Thrust Bearing | THX00238 |
| 1100101 | Shim, Stock, Steel – For Motor / Roller Bearing | THX00239 |
| 1100102 | Shim, Stock, Steel – For Motor / Roller Bearing | THX00240 |
| 1100103 | Shim, Stock, Steel – For Motor / Roller Bearing | THX00241 |
| 1100106 | Screw, Cap, Skt Hd, 3/4" x 5 1/2", Dr Hd | THX00242 |
| 1100130 | Screw, Cap, Hex Hd, 3/4" x 6 1/2”, Gr8, Pld, Dr Thd | THX00243 |
| 1100135 | Screw, Cap, Hex Hd, 3/4" x 5 1/2”, Gr8, Pld, Dr Thd | THX00244 |
| 1120004 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00245 |
| 1120065 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00246 |
| 1130088 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00247 |
| 1300025 | Screw, Cap, Skt Hd, 1/2" x 1 3/4", Dr Hd | THX00248 |
| 1320001 | Motor, Hydraulic, 32.7ci, White - PH Rotate Motor | THX00249 |
| 1320002 | Screw, Cap, Skt Hd, 3/8" x 2 1/4", Dr Hd | THX00250 |
| 1320014 | Cylinder, Lock PH | THX00251 |
| 1320015 | Ring, Internal Retaining, 5.0’ ID Shaft. 0.109 Thk- PH Lock | THX00252 |
| 1320084 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00253 |
| 1320088 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00254 |
| 1320090 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00255 |
| 1320093 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00256 |
| 1320204 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00257 |
| 1320211 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00258 |
| 1320213 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00259 |
| 1320216 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00260 |
| 1320218 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00261 |
| 1320219 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00262 |
| 1320220 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00263 |
| 1320221 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00264 |
| 1320223 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00265 |
| 1320224 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00266 |
| 1320226 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00267 |
| 1320227 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00268 |
| 1320228 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00269 |
| 1320232 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00270 |
| 1320234 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00271 |
| 1320241 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00272 |
| 1320242 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00273 |
| 1320243 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00274 |
| 1320245 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00275 |
| 1320246 | Hydraulic Hose – c/w FJIC x Long 90deg FJIC – Swvl Ends | THX00276 |
| 1340024 | Sling, Assembly, SWL 22.6 Ton (Turnbuckle c/w Clevis’s) | THX00277 |
| 1340077 | Pad Eye, Hanging Lug, SWL 18T - For Torque Track | THX00278 |
| 1390065 | Screw, Cap, Hex Hd, 3/8" x 1/2”, Gr8, Pld, Dr Hd | THX00279 |
| 1400103 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00280 |
| 1400104 | Hydraulic Hose – c/w FJIC x 90deg FJIC – Swvl Ends | THX00281 |
| 1400105 | Hydraulic Hose – c/w FJIC x FJIC – Swvl Ends | THX00282 |
| 1710008 | Screw, Cap, Hex Hd, 5/8" x 9”, Gr8, Pld, Rineer Motor | THX00283 |
| 5002304 | Rineer Motor, 125 Series, 4 Port, C62, Splined Shaft | THX00284 |
| 0009 | Valve, Ball, 2-Way, 2000-psi, WOG, 3/4"FNPTx3/4"FNPT | THX00285 |
| 0022 | Control Valve, REV Free Flow Check, | THX00286 |
| 0024 | Needle, Valve, 6000 PSIG, ¼” FNPT x ¼” FNPT | THX00287 |
| 0029 | Check Valve, Inline, 3000 PSI | THX00288 |
| 0031 | Relief Valve, Cartridge, Direct Acting, 10 GPM | THX00289 |
| 0061 | Gauge, 0-3000 PSI, 2.5” OD, x ¼” MNPT, LM | THX00290 |
| 0070 | Thermometer, Bi-Metal, ½” NPT | THX00291 |
| 0072 | THERMOWELL | THX00292 |
| 0074 | Filler Chuck for Accumulator | THX00293 |
| 0198 | Fitting, Hyd, 90deg., Elbow, 8MJIC x 12MORB | THX00294 |
| 0199 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 6MORB | THX00295 |
| 0200 | Fitting, Hyd, 90deg., Elbow, 4MJIC x 6MORB | THX00296 |
| 0202 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 4MORB – 250T Elev | THX00297 |
| 0204 | FITTING | THX00298 |
| 0213 | Fitting, Hyd, Str, 8MNPT x 8FJIC-Swivel | THX00299 |
| 0214 | Fitting, Hyd, Str, 4MNPT x 6FJIC-Swivel | THX00300 |
| 0231 | FITTING | THX00301 |
| 0235 | Fitting, Hyd, Str, 8MNPT x 8MNPT | THX00302 |
| 0238 | Fitting, Hyd, Str, 6MNPT x 6MNPT | THX00303 |
| 0239 | Fitting, Hyd, Str, 6MNPT x 4MNPT | THX00304 |
| 0281 | FITING | THX00305 |
| 0283 | Fitting, Hyd, Str, 8MJIC x 8MNPT | THX00306 |
| 0285 | FITTING | THX00307 |
| 0286 | Fitting, Hyd, Str, 4MJIC x 2MNPT | THX00308 |
| 0289 | Fitting, Hyd, Str, 6MJIC x 4MNPT | THX00309 |
| 0292 | Fitting, Hyd, Str, 6MJIC x 6MNPT -250T Elev. | THX00310 |
| 0298 | Fitting, Hyd, Str, 8MJIC x 6MNPT | THX00311 |
| 0314 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 4MNPT – 250T Elev. | THX00312 |
| 0316 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 6MNPT | THX00313 |
| 0318 | Fitting, Hyd, 90deg., Elbow, 8MJIC x 6MNPT | THX00314 |
| 0319 | Fitting, Hyd, 90deg., Elbow, 12MJIC x 8MNPT | THX00315 |
| 0323 | Fitting, Hyd, 90deg., Elbow, 4MJIC x 4MNPT | THX00316 |
| 0327 | Fitting, Hyd, Str, 4FNPT x 6FJIC-Swivel | THX00317 |
| 0339 | Fitting, Hyd, Str, 8FJIC x 4MJIC | THX00318 |
| 0349 | Fitting, Hyd, 45deg., Elbow, 6MJIC x 6FJIC-Swivel | THX00319 |
| 0352 | Fitting, Hyd, 90deg., Elbow, 6MJIC x 6FJIC-Swivel | THX00320 |
| 0353 | Fitting, Hyd, 90deg., Elbow, 4MJIC x 4FJIC-Swivel | THX00321 |
| 0354 | Fitting, Hyd, 90deg., Elbow, 8MJIC x 8FJIC-Swivel | THX00322 |
| 0357 | Fitting, Hyd, Tee, 12MJIC x 12MJIC x 8MNPT-Br | THX00323 |
| 0369 | Fitting, Hyd, Tee, 8MJIC x 8MJIC x 8MJIC | THX00324 |
| 0373 | Fitting, Hyd, Tee, 6MJIC x 6MJIC x 6FJIC-Swivel-Br | THX00325 |
| 0387 | PLUG | THX00326 |
| 0389 | CAP, RETRACTION | THX00327 |
| 0403 | Fitting, Hyd, Cap, 12FJIC, Stl | THX00328 |
| 0404 | Fitting, Hyd, Cap, 4FJIC, Stl | THX00329 |
| 0405 | Fitting, Hyd, Cap, 6FJIC, Stl | THX00330 |
| 0411 | Quick Coupler - Standard – Female, FNPT, Series 74 | THX00331 |
| 0418 | Quick Coupler - Standard – Male, FNPT, Series 74 | THX00332 |
| 0439 | Fitting, Hyd, Plug, Hex Hd, 8JIC | THX00333 |
| 0451 | PLUG | THX00334 |
| 0592 | O-Ring, 7.734” ID x .139” Dia. - For Motor Retainer | THX00335 |
| 0594 | O-RING | THX00336 |
| 0596 | O-RING | THX00337 |
| 0610 | O RING, DURO, 70, NITRIL | THX00338 |
| 0612 | O-Ring, N90-904, 0.351"IDx0.072"Dia | THX00339 |
| 0633 | Oil Seal, 6 1/2” Shaft x 7 1/2”OD (Top) | THX00340 |
| 0640 | SEAL, GRABBER, UNI-RING | THX00341 |
| 0642 | POLYPAK, SEAL, F/GRABBER | THX00342 |
| 0660 | Seal Kit – For Extend | THX00343 |
| 0661 | Kit, Seals, Cylinder, PAL, (forPart9520, 7668, 7972, 8621) | THX00344 |
| 0820 | Rail Mounted Terminal Block - Black | THX00345 |
| 0824 | Rail Mounted Terminal Block - Blue | THX00346 |
| 0926 | Cylinder, Hyd, Sngl Stage, 2.5”Bore, 1.25”Rod, 24”Str | THX00347 |
| 0928 | Cylinder, Hyd, Sngl Stage, 1.5”Bore, 1”Rod, 8”Str | THX00348 |
| 0975 | Screw, Cap, Hex Hd, 1" x 4”, Gr8, Pld | THX00349 |
| 0983 | Screw, Cap, Hex Hd, 1/2" x 1 1/2”, Gr8, Pld | THX00350 |
| 1042 | SCREW | THX00351 |
| 1083 | WASHER | THX00352 |
| 10845 | Valve, Relief, Cartridge, NG32 | THX00353 |
| 1090073 | MANIFOLD MINI BOOSTER | THX00354 |
| 1097 | Pin, Cotter, 1/8"ODx1-1/2"Lg, Pld | THX00355 |
| 1100011 | PINION | THX00356 |
| 1100012 | BONNET | THX00357 |
| 1100024 | MANIFOLD ASSEMBLY | THX00358 |
| 1100029 | BEARING | THX00359 |
| 1100030 | BEARING | THX00360 |
| 1100031 | BEARING | THX00361 |
| 1100033 | RETAINER | THX00362 |
| 1100034 | SLEEVE | THX00363 |
| 1100035 | RETAINER | THX00364 |
| 1100039 | PIN | THX00365 |
| 1100070 | BOTTLE, EXPANSION | THX00366 |
| 1100074 | MOTOR ADAPTER | THX00367 |
| 1100075 | GEAR SEGMENT | THX00368 |
| 1100080 | LEG | THX00369 |
| 1100094 | GRABBER LIFT MANIFOLD ASSEMBLY | THX00370 |
| 1100105 | GUARD | THX00371 |
| 1100116 | Ring, Retaining, Internal, 3.000"IDShaft, 0.093"Thk | THX00372 |
| 1100119 | GUARD | THX00373 |
| 1100120 | GUARD | THX00374 |
| 1110230 | Valve, Counterbalance, Pilot-Operated, 3:1, 60-l/min, 80to230-bar | THX00375 |
| 1120189 | MOTOR | THX00376 |
| 1120211 | Kit, Spares, Level1, TopDrive, 250-HXI-700 | THX00377 |
| 11718 | FITTING | THX00378 |
| 1268 | FITTING | THX00379 |
| 1310001 | KIT TRANSDUCER | THX00380 |
| 13157 | PAD | THX00381 |
| 1320065 | MANIFOLD | THX00382 |
| 1320115 | HOSE | THX00383 |
| 13392 | LOAD COLLAR ASSEMBLY | THX00384 |
| 13553 | SUB | THX00385 |
| 13771 | GOOSENECK | THX00386 |
| 1410066 | Pin, Hitch, 3/4"Diax4-1/4"Usable Length, c/w Safety Pin & Lanya | THX00387 |
| 15063 | NIPPLE | THX00388 |
| 15385 | LINER, SIDE, UHMW, 3/4X3-3/8X72, HMI TORQUE BUSHING | THX00389 |
| 15582 | Pin, Cotter, 1/8"ODx2"Lg, Pld | THX00390 |
| 16764 | SHACKLE | THX00391 |
| 17801 | Seal, EGC, Shaft, Rineer | THX00392 |
| 2075 | VALVE, POPPET, DIRECTIONAL, BOSCH | THX00393 |
| 2593 | CHAIN | THX00394 |
| 3024 | NUT | THX00395 |
| 3040-1 | Piston/CylinderAssembly, Grabber | THX00396 |
| 340054 | O-RING | THX00397 |
| 340065 | O-RING | THX00398 |
| 340106 | O-RING | THX00399 |
| 3439 | LEG LOWER GRABBER | THX00400 |
| 3460 | CAP FITTING | THX00401 |
| 3461 | CAP FITTING | THX00402 |
| 3687 | WASHER | THX00403 |
| 4025 | O-RING | THX00404 |
| 4026 | O-RING | THX00405 |
| 5000499 | Shock Absorber, Modified, Grabber Leg, HMI | THX00406 |
| 5000629 | Cylinder, Hyd, Sngl Stage, 2.5"Bore, 1.25"Rod, 16.125"Stroke | THX00407 |
| 5007144 | Packing Set, Upper, Washpipe, EMI/EXI/HXI, For Part # 5007136 | THX00408 |
| 5007145 | Washpipe, P-Series, EMI/EXI/HXI, For Part # 5007136 | THX00409 |
| 5007196 | Ring, Snap, Washpipe, EMI/EXI/HXI, For Part # 5007136 | THX00410 |
| 5008023 | Valve, Reduce/Relief, Direct-Acting, T-17A, Cartridge, 750-3000ps | THX00411 |
| 5013400 | Kit, Hoses, AuxHydraulics, PCSystem, 250-HXI-700 | THX00412 |
| 5016061 | Kit, Fasteners, Liner, Torque Bushing, EC/EXI/HC/HS/HMI/HCI/HXI | THX00413 |
| 5019632 | Cylinder, Hyd, Double Acting, 1.5"Bore, 1"Rod, 21"Stroke, 1/4"FNPT | THX00414 |
| 5019808 | Cylinder, Hydraulic, 2.5" Bore, 1.25" Rod, 5.0" Stroke | THX00415 |
| 5021812 | Hose, Hyd, Synflex, Eaton, 3130-02x34.5", #4FJICx#4FJIC | THX00416 |
| 5021813 | Hose, Hyd, Synflex, Eaton, 3130-02x29", #4FJICx#4 90°FJIC | THX00417 |
| 5021814 | Hose, Hyd, Synflex, Eaton, 3130-02x27", #4FJICx#4FJIC | THX00418 |
| 5033 | PIN | THX00419 |
| 5064237 | PackingSet, Swivel, 3.625"IDx5.00"OD, 5000psi | THX00420 |
| 5423 | SPRING, GRABBER LEG, HMI 150/200/250T | THX00421 |
| 5752 | TOOL, GRABBER CYLINDER GLAND NUT | THX00422 |
| 590222 | MANIFOLD 12 STATION | THX00423 |
| 590224 | MOTOR MANIFOLD | THX00424 |
| 590225 | MANIFOLD MOTOR | THX00425 |
| 590230 | MANIFOLD GRABBER LIFT | THX00426 |
| 6200 | RETAINING PIN | THX00427 |
| 720457 | GRABBER ASSEMBLY | THX00428 |
| 730784 Rev A | Retainer, Upper, Load Nut, EMI | THX00429 |
| 730785 | LOAD NUT ASSEMBLY | THX00430 |
| 731141 | Grease, ExtraDuty, NLGI#2, HotWeather, Tesco, (1Tube) | THX00431 |
| 770763 | ENCLOSER | THX00432 |
| 770775 | Switch, Proximity, M18, 2 Wire, 5-25VDC, Hi-Pressure | THX00433 |
| 810003 | Pin, Spring, Coiled, 3/16"ODx1"Lg | THX00434 |
| 810065 Rev B | Clamping Box, Machining, Grabber Box, 9.00 | THX00435 |
| 810356 | FLANGE | THX00436 |
| 810393 | CYLINDER | THX00437 |
| 810396 | RETAINER | THX00438 |
| 810492 | GUARD | THX00439 |
| 820141 | ROTARY SEAL ASSEMBLY | THX00440 |
| 820146 | PINION GEAR | THX00441 |
| 820149 | SPACER | THX00442 |
| 820165 | BRACKET | THX00443 |
| 840041 | SLEWING BEARING | THX00444 |
| 8860-2 | SEAL KIT, GRABBER CYLINDER, ALL | THX00445 |
| 8987 | SPLIT GUIDE | THX00446 |
| 970324 | Kit, Seals, O-Ring, HCI/HMI/HXI | THX00447 |
| N5000 | Ring, Internal Retaining, Truarc, PH Lock | THX00448 |
Contact DTO
Contact DTO Supply for a quote on your parts list today. Our team provides reliable & industry competitive pricing & delivery.